![]() ![]() It appears that the Phantom 3 Standard can ONLY be updated via thr DJI Go App now. See this video on how to see hidden files on Windows. This file contains further detailed information on each hardware module within the P3 that’s updated. There is also another LOG file in a hidden directory on the SD card called /MISC/LOG. The final line in the LOG file should have the word “Success”. Check the upgrade status by opening the “.txt” file that is automatically generated on the SD card after the update (you need to plug the SD back into your computer for this). When the light on the gimbal goes SOLID GREEN ( and you hear the DA.DA.DA beep ), turn off the Phantom by pressing and releasing the power button quickly, then immediately press and hold it in for 2 seconds.Ģ. It’s ONLY when the light on the front of the gimbal goes SOLID GREEN that the process is complete (you will also hear the DA…DA.DA beep). You will also hear the P3 startup noise a few times whilst the ESC’s firmware is being updated. Note: During the firmware upgrade the lights on the arms of the Phantom will flash different colours (and go completely OFF), beep in different patterns, gimbal will move and go limp. The camera status indicator will blink green and red to indicate the upgrade is in progress and turn solid GREEN when the update has completed with success. It will take approximately 25 minutes to complete the firmware update. Note: How long the update takes and the precise sequence of events migth differ from the video so use it as reference only. ![]() The below video shows the complete update process. Upgrade will begin automatically after aircraft is powered on. Ensure the remote controller is powered OFF and then power ON the aircraft. ![]() NOTE: The video shows downloading firmware 1.3.20 for the Phantom 3 Professional, you will need to download the latest version ( for Pro/Advanced - for Standard ) for your particular model.ġ. ![]() The below video shows the process of adding the firmware. Remove the SD card from your PC.Įnsure the aircraft and controller is powered OFF then insert the SD card into the card slot on the camera. BIN file into the root directory of the SD card. Phantom 3 Standard: /downloads/phantom_3_standard/en/Phantom_3_%20Standard%20_Release_Note_en_0907.pdfĢ. Phantom 3 Advanced: /downloads/phantom_3/en/Phantom_3_Advanced_Release_Note_en_0907.pdf Phantom 3 Pro: /downloads/phantom_3/en/Phantom_3_Professional_Release_Note_en_0907.pdf Review the Release Notes for the particular P3 so you know what’s changed. The update process for this is now done ONLY via the APP. UPDATE: DJI have pulled the firmware file for the standard from their website. Note: The Phantom Professional, Phantom Advanced, and Phantom Standard use different firmware files. Download the firmware update package from the official DJI website Step 2- Prepare the Firmware Update Packageġ. NOTE: If you are having issues with the controller always saying there is an update, see my updated info in the "Updating the Remote Controller Firmware" secion below.įollow the process described below to upgrade the Phantom 3, Remote Controller and Battery to firmware version.Įnsure the Intelligent Flight Battery has at least 50% power and the SD card has been formatted using the DJI GO App. ![]()
0 Comments
Leave a Reply. |